Magic Eye for SKY Digital |
Connecting your tvLINK
- Switch off the power supply or remove the plug at the mains socket and ensure that there are no lights illuminated on the front panel of the set top box.
- Ensure that the power supply to any other connected equipment (secondary TV for example) is also disconnected.
- Locate the RF out-2 connection at the back of your Sky box.
- Connect the coax cable ensuring it is a continuous run from the digital system to the second TV set or video recorder (the maximum recommended length of cabling is 30m metres).
- Connect the coax to the tvLINK and plug the tvLINK into the second TV set or video recorder input.
- Check all connections are securely fitted.
- Switch the set top box power supply back ON at the mains socket. Also power on any other disconnected equipment. Wait for 2 minutes after the red standby light has appeared.
- Press the Sky button on the remote control to return the set top box to full power,confirming there is a green light illuminated on the box.
- Once Box has been repowered, enable RF 2 Outlet power supply so TV Link can be used.
No comments:
Post a Comment